iPort/LAN Virtual ComPort (VCP) Driver v4.7.410.0
MCC Windows LAN VCP Driver v4.7.410.0

This driver supports MCC's iPort/LAN I2C Bus adapter.


Supported MCC I2C Bus host adapters include:

  • iPort/LAN 2 (#MIIC-205)
  • iPort/LAN (#MIIC-205)
Supported Operating Systems:
  • Windows XP (x86), Vista/7/8/8.1/10 (x86/x64).
Corrections, Enhancements, and New Features:
  • Improved driver installation for Windows 10.
    This copyrighted product update is offered free of charge to users of MCC I2C Bus host adapters. Its use is covered by the MCC license agreement available during installation.
Download and Installation Instructions:

NOTE: MCC recommends that you leave older versions of driver files on your system. Other devices on your system may reference older versions of drivers and may stop functioning correctly if the driver files are removed. 

  1. If a DHCP dynamic IP address server is not available on your network, or Static IP addressing is required, run the iPort/LAN Device Discovery Utility before installing the VCP driver.
  2. Administrative Privilege Required.
  3. Download and save-as the ZIP file into a folder.
  4. Right-Click the downloaded ZIP file and Extract All (Uncompress).
  5. Plug the MCC iPort/LAN adapter into a network hub with a standard cable, or directly into your PC network port using a cross-over cable..
  6. Open the extracted folder and double-click Setup.exe.
  7. Select the iPort/LAN device and click Next, or click Refresh.
  8. If the iPort/LAN is not detected, you may need to set the IP address with the iPort/LAN Device Discovery Utility.
  9. If required, change the ComPort number.
  10. Click Finish.
  11. Use the iPort Message Center or Windows Device Manager to find the assigned COMn number.
  12. For additional software and hardware installation instructions, see the Installation Section of the specific adapter User's Guide.
Click to Download (2MB)