Two new features have been added to our I2C
Bus Monitor (#MIIC-101) support package:
A new USB Interface
A new release of our I2C Bus/SMBus Analyzer Software
See details below.
I2C
Bus/SMBus Monitor (#MIIC-101) USB Interface
Our new USB Interface Cable plugs into the COM port on the I2C
Bus Monitor (#MIIC-101) unit and a USB port on a PC. The USB interface
cable works with our standard I2C Bus Monitor (#MIIC-101) and
any version of our I2C Bus/SMBus Analyzer Software, or customer
developed software. The USB interface cable is compatible with Windows
XP (x86), Vista (x86 and x64), and Windows 7 (x64).
The USB interface cable is available three ways:
I2C Bus Monitor USB Interface
#MIIC-101/USB
Add-on interface for an existing I2C
Bus/SMBus Monitor (#MIIC-101). Add a USB interface to access your monitor
in Remote or Dump Modes. Compatible with all hardware and software version.
I2C Bus Monitor with USB Interface #MIIC-101GU
Order a USB interface with a new I2C
Bus/SMBus Monitor.
I2C Bus Monitor with USB Interface+Analyzer
Software Kit #MIIC-101K3GU
Order a USB interface with a new I2C
Bus/SMBus Monitor+Analyzer Software Kit.
I2C Bus/SMBus Analyzer Software Release
3 is compatible with USB or RS-232 interface I2C Bus/SMBus Monitors
(#MIIC-101). Many new features have been added including:
USB or RS-232 Host Computer Interface Detection
Slave Address Read/Write/Ack/Nack Display Filter
Message Data Match/No-Match Display Filter
Smart Battery System V1.0/1.1 with PEC Support
Smart Battery System Error/Warning/Data-Violation Display Filter
Message Start Timestamp with Absolute/Relative/Date+Time Display
Message Display Recording to File
Message Data Byte Index Display
Hex/Decimal/Binary/ASCII/Comma-Delimited Data Display
TYPICAL APPLICATIONS
Product Development, Software/Hardware Testing and Troubleshooting.
Manufacturing: Testing and Debugging, EEPROM Programming, Quality Control.
Field Service: Field diagnosis, Repair service and Verification, Product
Updates.