I2C Bus/SMBus Analyzer Software Update

Version 2.2.1
for MCC I2C/SMBus Monitor (#MIIC-101)
I2C Bus Monitor (#MIIC-101) Version 2.2.1 of the I2C Bus/SMBus Analyzer Software (SMB-SW32.EXE) update for our I2C/SMBus Monitor (#MIIC-101) adds support for the Windows Installer. Windows Installer support is required for software installation on all Windows 7 (x86/64) computers.

 The enhancements / corrections we have added to this product include:

Enhancements:

  1. Windows Installer compatible.
Corrections:
  1. None.
OS Supported:
  1. Windows XP, Vista (x86/64), and 7 (x86/64).
  2. Windows 2000 (Requires Windows Installer download from Microsoft).
Revision History:
  1. Release V2.2.1.
  2. Add Windows Installer support.
  3. Release V2.2.
  4. Log File Write: Open on Trace, Close on Halt.
  5. Terminate Trace on Monitor Buffer Full detection.
  6. ComPort Error: Resync if PC missed character.
  7. Halt Lockup: Remove WaitForThread procedure.
  8. Memory Access Violation: Revise parser string handling.
  9. Release V2.1.
  10. Improve ComPort compatibility.
  11. Release V2.0.
  12. Add Pause option to Log File display.
  13. Support printing of selected text.
  14. Default to 57600 baud.
  15. Display detected ComPorts.
  16. Add support for local, USB, and LAN based ComPorts.
  17. Add Byte Mode Viewer.
  18. Convert to Win32.
  19. Release V1.6.
  20. Add Address Map control to Byte Mode message display.
  21. Correct Log File (*.i2c) Display premature termination.
  22. Correct Log File (*.i2c) Display formatting.
  23. Correct Exit lockup after viewing log file.
  24. Correct Log File (*.i2c) Display missing lines.


Update Distribution/Licensing:

This copyrighted product update is offered free of charge to current licensees of the SMB-SW.EXE and SMB-SW32.EXE I2C Bus/SMBus Analyzer software. Its use is covered by the MCC license agreement enclosed. Downloading and use of this update indicates your acceptance of the enclosed license terms.

NOTE: Update Activation - This software update requires the registration file (SMB-SW.REG). This file was installed in the product installation folder [C:/Program Files/MCC/I2C Bus_SMBus Analyzer Vx.x] on your computer with the installation of your original purchased CD. To activate this update, copy the registration file to the new installation folder.

Update Installation Instructions:

  1. Click the Install link below to start the installation.
  2. Your permission to install a browser plug-in may be required. See the browser Information Bar on the Installing page for details.
  3. Follow onscreen instructions.
  4. Update Activation - This software update requires the registration file (SMB-SW.REG). This file was installed in the product installation folder [C:/Program Files/MCC/I2C Bus_SMBus Analyzer Vx.x] on your computer when you installed your original purchased product CD. To activate this update, copy the registration file to the new installation folder.
Install (1 MB)

Need Help? Click HERE to contact our support team.